Specifications

5
Once you have unboxed your PC-100 you must determine whether
you have a Pole or Standard display model. If you have a Standard
display model, simply connect the power cord to the scale and then to
a 110 VAC 60 Hz outlet. If you have Pole display model follow the
instructions below on how to assemble it.
Safety Precautions
 Place the scale on a flat and rigid surface
 Place the scale far from strong RF interference
 Level the scale using its adjustable feet
 Do not subject the platter to sudden impacts
 Do not spill the water or any other liquid on the scale
 Do not use any solvents to clean the scale
 Do not remove the safety ground on the power cord