Instruction manual

109

Direct Key Programming

Use the following procedure to select direct-key programming:

Direct PLU/COMBO/Dept. key

You can assign PLUs, combo meals and departments directly to the keyboard. In the case of combo meals

or PLUs, you may assign up to 10-levels to be accessed directly on the keyboard.

In the case of setting “000001 DIRECT PLU”

Select a pertinent key no. from the

key numbers list (Refer to the next

page).

In the SETTING window, select “2 DIRECT KEY.”

• The DIRECT KEY window will appear.

• TYPE (Use the selective entry)

PLU: Assigns the key as a direct PLU key.

COMBO: Assigns the key as a direct combo key.

DEPT: Assigns the key as a direct department key.

NOTE

•

You can also select a direct PLU key by pressing the

corresponding key when the PLU has been assigned directly

on the keyboard instead of selecting the key from the menu.

•

When selecting a department, the screen on which a

department number is to be entered (the message “DEPT.

CODE”) will appear.

•

When selecting a combo, the screen on which a combo table

number is to be entered (“COMBO TBL#”) will appear.

• LEVEL1 thru 10 (Use the numeric entry)

Enter a PLU number or combo table number for each level.

For example, if you want to use this key as PLU no.1 (level

1) and PLU no.101 (level 2), enter 1 for the “LEVEL1” and

101 for the “LEVEL2.”