Operation Manual

Add-on code

UPC-A and EAN-13 may be followed by a two digits number or a five digits number as add-on code, excepting

UPC-A without a check digit plus two or five digits add-on code.

Therefore, the total number of digits enterable for sales entries are as shown below:

Your register automatically judges the add-on code in an EAN code entered from the total number

of digits and the flag.

EAN/UPC programming

Each EAN or UPC code (hereinafter referred to as EAN) requires you to program the following.

• EAN code (max. 13 digits)

• Associated department (1-50)

When an EAN is associated with a department, the following functions of the EAN depend on the

programming for the department.

• Grouping (Group 1 through14)

• HALO (only for the subdepartment)

• Single item cash sale/Single item finalization

EAN code delete method

You can program how you delete EAN codes; deleting in the programming, inhibit deleting, or deleting the

EAN codes that have not been accessed for a certain period, which can be programmed (up to 99 days)

when you execute #105 in Z1 mode.

Unit price (max. six digits)

Base quantity for split-pricing entries

Sign (+/–)

Tax status

If you do not program tax status for an EAN, the tax status of the EAN follows to the status of the associated

department.

Item label (12 characters) (option max. 16 characters)

Commission group (1-9)

EAN link

System programming for EAN function

Delete period for non-accessed EAN codes

Non-PLU code format

Type of press code

Price entry method for press code

Label of record in EAN file

Note

Code entry No add-on code 2-digit add-on code 5-digit add-on code

UPC-A 12 14 17

UPC-A w/leading zero 13 15 18

UPC-A w/o check digit 11 ––

UPC-E 6 ––

EAN-8 8 ––

EAN-13 13 15 18