Product data

Convert

• Make the Change

Current ECR Type

• Will only display ECR's which are capable of being upgraded to SmartCard

operation.

• The ECR to be converted.

Exit

• Close the Change Type form.

This is where you configure the settings for On-Line Communications. Each ECR has

separate settings in the database.

This form is used for a number of tasks; Sending, Retrieving and Exporting Data. The

caption on the button shown as Get on the sample below, will change to reflect the

operation about to be performed on the selected ECR.

Control Descriptions:

Port

•This is the Computer Port to use for ECR Communications. Normally this would

be set to either 1 or 2, but Comm Ports up to COM16 are supported. You will not

be allowed to select an invalid Comm Port.