Service manual

2 OF 5
ER-A Model Mode Switch, Keys and Job Codes Overview
• MGR MODE: The manager can use this mode to make entries that may not be permitted by
servers/cashiers such as voids and discounts.
• X1/Z1 MODE: X1 Mode is used to take various daily reading reports. Z1 MODE is used to take
various daily resetting reports.
• X2/Z2 MODE: X2 Mode is used to take various weekly or monthly reading reports. Z2 MODE is
used to take various weekly or monthly resetting reports.
• SRV MODE: (Also known as the 7 o’clock position) This mode allows access to SRV Mode
programming. (Authorized Sharp Dealer or Servicers only)
• SRV
’ MODE: (Also known as the 6 o’clock position) This mode is used to perform a Program or
Master Reset and access SRV Mode programming. (Authorized Sharp Dealer or Servicers only)
Page 28 of 108