Service manual

ER-A242U SPECIFICATIONS
– 3 –
Segment
Decimal Point
6. PRINTER
1) Printer
• Part number : M-T53II
• NO. of station : 1 (Receipt or journal)
• Validation : No.
• Printing system : Line thermal
• No. of dot : 288 dots
• Dot pitch : Horizontal 0.167mm
Vertical 0.167mm
• Font : 10 dots (W) u 24 dots (H)
• Printing capacity : max. 24 characters/Line
• Character size : 1.67mm (W) u 4.17mm (H) at 10 u 24 dots
• Print pitch : Column distance 2.0mm
Row distance 5.21mm
• Print speed : Approximate 60mm/s (Approximate 12 l/s)
• Paper feed speed : Approximate 60mm/s (Approximate 12 l/s)
(Manual feed) : Approximate 60mm/s (Approximate 12 l/s)
• Reliability : Mechanism LIFE 6 million lines used to high-
quality thermal paper
• Paper end sensor : Set up
• Cutter : Manual Cutter
• Near end sensor : No
2) Paper
3) Logo stamp
• No
4) Printing area
Number of thermal head heater elements 288 dots
Display
position
Description
Amount 1-8
Minus sign 2-10 -: Floating
Error 8-10 Exx:xx = error code
PGM Mode 10 P
CASH, CHECK,
CHARGE
10 F: Light up when a registration is
finalized by depressing CASH,
CHECK, CHARGE key
SUB TOTAL/
short tender
10 o
Change 10 C: Light up whenever the change
due amount appears in the display.
Currency
Conversion
10 c: Light up whenever the foreign
amount appears in the display.
Department 9-10 No zero-suppressed
PLU 7-10 No zero-suppressed
Repeat 8 Endless count, starting from 2.
Receipt OFF 9 _
DC _: Double size character entry status
SHIFT _: Shift character entry status
NUMBER _: Number character entry status
Clerk No. 2, 3 -xx-: clerk number
EJ FULL 8-10 E-E: Light up when EJ memory is
FULL at the timing of key entry (by
PGM selection).
Low Battery 10 L:
No Battery 10
L
:
Display
position
Description
Decimal point 7-1
TAB 4-1
EJ near full 8, 9 (by PGM selection)
• Paper rolldimension: 2.25 m 0.02 inch
57.5 m 0.5mm in width
Max. 3.15 inch
Max. 30mm in diameter
• Paper quality: High-quality thermal paper
paper thickness: 0.06 to 0.08mm
Nihon seisi thermal paper TF50KS-E2C
KANZAN thermal paper: KF50
KSP thermal paper: P350
0.167
(4.75) (4.75)48 (288 dots)
print area
(max.24 characters)
(units : mm)
57.5±0.5
(Paper dimension)