Instruction manual

ManualsBrandsSharp ManualsBusiness equipmentER-87SL

PLU level shift (for direct PLUs)

This shift can double or triple the code of direct PLUs on your POS terminal without adding additional direct

PLU keys. You can use direct PLUs in three levels by utilizing the PLU level shift keys

⁄

, and

‹

These keys have the following functions:

⁄

: Shifts the PLU level from level 2 or 3 to level 1 (normal level).

: Shifts the PLU level from level 1 or 3 to level 2.

‹

: Shifts the PLU level from level 1 or 2 to level 3.

You must program your POS terminal in the PGM mode to select one of the two PLU level shift modes —

automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the

REG and MGR modes or in the MGR mode alone.

* The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU

key or finalizing each transaction.

** The lock shift mode holds the current PLU level until depression of a PLU level shift key.

Automatic return mode

If you want to shift the PLU level in the automatic return mode, press a desired PLU level shift key before a

numeric entry.

When you use the FF method, you need not press the

key on numeric entry.

Lock shift mode

If you want to shift the PLU level in the lock shift mode, press a desired PLU level shift key before a numeric entry.

• If you select the automatic return mode, it is not necessary to use the

⁄

key on the keyboard, but if you

select the lock shift mode, it is necessary to use the key.

• When you use the FF method, you need not press the

key on numeric entry.

NOTE



⁄

Direct PLU Stay in the current level

(Q’ty, )

Numeric entry

‹

Procedure

NOTE

Direct PLU (Finalization)

(Returning every item entry)

(Returning every transaction)

(Q’ty, )

Numeric entry

‹

Direct PLU Return to level 1

(Q’ty, )

Numeric entry

‹

Procedure

~ER-A750(SEEG)-3 97.3.31 3:30 PM Page 43