Instruction manual

204

Reading of Stored Programs

You can read programs stored in the PGM1 or PGM2 mode.

Program reading sequence

To read those programs stored in the PGM1 or PGM2 mode, use one of the following procedures:

Selecting an item from the menu

1. Select “1 READING” in the PGM1 or PGM2 mode menu window to display the items list.

2. Select an item listed in the table shown later.

3. If needed, enter starting and ending codes to specify the range of the selected item.

4. Select a device (“DISPLAY” or “REPORT PRINTER”) to receive the output.

To read “drink dispenser,” select “3 DD READING” in the PGM2 mode menu window.

Entering a job code

1. Enter a job code listed in the table shown later in the PGM1 or PGM2 mode menu window.

2. If needed, enter starting and ending codes to specify the range of the selected item.

3. Select a device (“DISPLAY” or “REPORT PRINTER”) to receive the output.

Job code: Item: Description: Available mode:

1100 1 DEPT * Departments PGM1 or PGM2

1200 2 PLU * PLU PGM1 or PGM2

2220 3 LINK PLU TABLE * Link PLU table PGM2

2221 4 SET PLU TABLE * Set PLU table PGM2

2223 5 CONDIMENT TABLE * Condiment table PGM2

2225 6 PROMOTION TABLE Promotion table PGM2

2226 7 RECIPE TABLE * Recipe table PGM2

2227 8 INGREDIENT * Ingredient table PGM1 or PGM2

2618 9 SCALE TABLE Scale table PGM2

2240 10 DEPT. SHIFT Department shift PGM2

2241 11 HAPPY HOUR Happy hour PGM2

1300 12 FUNCTION Function PGM1 or PGM2

2300 13 MEDIA Media key PGM2

1400 14 CLERK Clerk PGM1 or PGM2

XXXX

NOTE

~ER-A750(SEEG)-10 97.3.31 3:55 PM Page 204