Instruction manual

170

Employee

You can program various items for each employee.

Program each item as follows:

• SECRET CODE (Use the numeric entry)

Secret code (max. 4 digits: 0000 to 9999)

• NAME (Use the character entry)

Name for the employee. Up to 8 characters can be entered.

• *

CLERK CODE (Use the numeric entry)

Clerk code (max. 4 digits: 0001 to 9999)

• MANAGER CODE (Use the numeric entry)

Manager code (max. 2 digits: 01 to 99)

The manager who is responsible or capable for adjustments

to the employee’s hours.

• STD. HOURS (Use the numeric entry)

Standard number of hours for which the employee should

work a day (max. 3 digits: 0 to 999)

• *

LOCATION#1 through #4 (Use the numeric entry)

Job location table number (max. 2 digit: 01 to 99)

The clerk whom an employee code has been assigned cannot

time in unless the corresponding employee times in.

If no job location table number is programmed for an employee

time-in operation, the location no. 1 will be assigned.

Therefore, make sure to program a job location table number

for “LOCATION#1.”

NOTE

Procedure

Pertinent

employee code

~ER-A750(SEEG)-9 97.3.31 3:53 PM Page 170