Instruction manual

126
4.
Select “01” to program for department 1.
• The “01” window will appear.
5.
On the first page of the “01” window, program the unit price
and description as follows:
There are three entry patterns for the programming: the numeric
entry, character entry, and selective entry.
• Move the cursor to “PRICE,” enter “200” by using
numeric keys, then press the
E
key. ➔ Numeric
entry
• Move the cursor to “DESCRIPTION,” enter “ABCDE” by
using character keys, then press the
E
key. ➔
Character entry
If you want to clear setting, press the
L
key before you
press the
E
key.
6.
Press the
Î
key to go to the next page of the “01” window,
then program the machine to set “taxable 2” as follows:
• Move the cursor to “TAXABLE 2,” press the
.
key to
select “YES,” then press the
E
key. ➔ Selective entry
The
.
key toggles between two options as follows:
NO
➔ YES ➔ NO ➔ ....
Pressing the
s
key displays all pertinent options.
7.
Select one of the following actions:
• To cancel the programming, press the
C
key. Select “1
YES” in the “ARE YOU SURE ?” window.
• To finalize the programming, press the
c
key, then press
the
C
key. You will return to the “DEPT” window.
• To program for the following department, press the
˜
key.
The “02” window will appear. To return to the “01” window,
press the
∏
key.
NOTE
NOTE
The following sections describe how to program each item which is contained in a programming group.
E C
Î ¨
~ER-A750(SEEG)-8 97.3.31 3:48 PM Page 126