Setup Manual

EN 10

Part Names

Remote Control Unit

1 Signal transmitter

2 Operation buttons

Check the following before requesting repairs.

Problem Possible Solution

• Power is not turned on. • Check if the AC cord is connected properly and plugged securely into the

outlet.

• When the lamp is not lit, turn on the power using the power button on the

main body.

• An indication Temperature

or Temperature of Monitor

blinks, and power is turned off

automatically.

• The temperature of the Monitor has risen. Get rid of the causes of the

increased temperature (such as direct sunlight or hot air).

• Check if the Monitor is installed in a condition or location where the

temperature rise occurs easily. Do not cover the ventilation opening on the

back of the main body when installing.

• Frequently remove dust from internal equipment or ventilation opening if it

can be removed from the outside. For removing dust inside the equipment,

consult your dealer.

Troubleshooting