OPERATION MANUAL
7
E
MOUNTING PRECAUTIONS
• Thisproductisforindooruse.
• AmountingbracketcompliantwithVESAspecificationsis
required.
• Sincethemonitorisheavy,consultyourdealerbefore
installing, removing or moving the monitor.
• Mountingthemonitoronthewallrequiresspecialexpertise
and the work must be performed by an authorized SHARP 
dealer. You should never attempt to perform any of this 
work yourself. Our company will bear no responsibility 
for accidents or injuries caused by improper mounting or 
mishandling.
• Usethemonitorwiththesurfaceperpendiculartoalevel
surface. 
• Whenmovingthemonitor,besuretoholdthehandlesor
the parts marked by 
 below. Do not grasp the screen 
or tray. This may cause product damage, failure, or injury.
[PN-86HC1]
[PN-75HC1]
[PN-65HC1]
• Thismonitorshouldbeusedatanambienttemperature
between 41°F (5°C) and 95°F (35°C). Provide enough 
space around the monitor to prevent heat from 
accumulating inside.
Unit: inch [mm]
7-7/8 [200]
2 [50]
2
[50]
2
[50]
1-7/16 [35]
• Ifitisdifficulttoprovidesufficientspaceforanyreason
such as the installation of the monitor inside a housing or 
of several units side-by-side, or if the ambient temperature 
may be outside of the range of 41°F (5°C) to 95°F (35°C), 
install a fan or take other measures to keep the ambient 
temperature within the required range.
• Temperatureconditionmaychangewhenusingthemonitor
together with the optional equipments recommended by 
SHARP. In such cases, please check the temperature 
condition specified by the optional equipments.
• Donotblockanyventilationopenings.Ifthetemperature
inside the monitor rises, this could lead to a malfunction.
• Donotplacethemonitoronadevicewhichgeneratesheat.
• Donotusetheproductinlocationswheretheunitis
exposed to direct sunlight or other strong light. Since this 
product operates with infrared rays, such light may cause a 
malfunction.
• Whenusingmultiplemonitorsclosely,besuretheinfrared
transmitter/receiver does not affect the other ones.










