Eco Declaration

Annex B1 of ECMA-370 6
th
edition Page 2 (6)
5
Model number *
MX-3051
Logo
Issue date *
13th, November 2019(Updated 3rd, June 2021)
Product environmental attributes - Legal requirements Requirement met
Item
Yes
No
n.a.
P1
Hazardous substances and preparations
P1.1*
Products do comply with the current European RoHS Directive. (See legal reference and NOTE B1)
P1.2*
Products do not contain Asbestos (see legal reference).
Comment: Legal reference has no maximum concentration value.
P1.3*
Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1-
trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
concentration values.
P1.4*
Products do not contain more than; 0,005% polychlorinated biphenyl (PCB), 0,005% polychlorinated
terphenyl (PCT) in preparations (see legal reference).
P1.5*
Products do not contain more than 0,1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the
chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
P1.6*
Parts with direct and prolonged skin contact do not release nickel in concentrations above 0,5 g/cm
2
/week
(see legal reference).
Comment: Max limit in legal reference when tested according to EN1811:2011-5.
P1.7*
REACH Article 33 information about substances in articles is available at (add URL or mail contact):
www.sharp.eu
P2
Batteries
P2.1*
If the product contains a battery or an accumulator, the battery/accumulator is labeled with the disposal
symbol. Information on proper disposal is provided in user manual. (See legal reference)
P2.2*
Batteries or accumulators do not contain more than 0,0005% of mercury or 0,002% of cadmium. (See legal
reference)
P2.3*
Batteries and accumulators are readily removable. (See legal reference)
P2.4*
Documentation includes the number of cycles the (secondary) battery can withstand. (See legal reference)
P2.5*
When internal batteries of a notebook computer cannot be “accessed and replaced by a nonprofessional
user”, the related text is present and legible on the external packaging (see legal reference)
P3
Conformity verification & Eco design (ErP)
P3.1*
The product is CE-marked to show conformance with applicable legal requirements (see legal reference).
The Declaration of Conformity can be requested at (add link or e-mail address):
P3.2*
The product complies with the Eco design Requirements for Energy-Related Products,
(see legal reference).
Required information is; given in item P15 or added to this document,
available at (add URL):
P4
Consumable materials
P4.1*
If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium at a level greater
than 0,01% (see legal reference and NOTE B1).
P4.2*
If ink/toner is used in the product, it does not contain cadmium at a level greater than 0,1% by weight (see
legal reference)
P4.3*
If the ink/toner formulation/preparation is classified as hazardous or contains a substance for which there
are Community workplace exposure limits, the product/packaging is adequately labeled according to
applicable regulations and a Safety Data Sheet (SDS) in accordance with these requirements is available
(see legal reference). NOTE: The toner is not classified as hazardous.
P5
Product packaging
P5.1*
Packaging and packaging components do not contain more than 0,01% lead, mercury, cadmium and
hexavalent chromium by weight of these together.
P5.2*
The packaging materials are marked with abbreviations and numbers indicating the nature of the material(s)
used (see legal reference).
P5.3*
The product packaging material is free from ozone depleting substances as specified in the Montreal
Protocol (see legal reference).
Comment: Legal reference has no maximum concentration values.
P6
Treatment information
P6.1*
Information for recyclers/treatment facilities is available (see legal reference).
NOTE B1 Restriction applies to the homogeneous material, unless other specified and expressed in weight %. Stating “Yes” means that
the product is compliant with the mandatory requirements.