Operation Manual

201
Chapter 10: The SOLVER Feature
Note: The analysis will be limited to the range specified; a solution
outside of the analysis range will not be detected. If no crossing
pointisfoundintherange,thenamessage“Nosolutionfound”will
show at the bottom of the screen.
7. Pressing
@
h
at this point will engage the analysis, as
wellasthegraphicalrepresentationoftheequation.Notethat
while the cursor flashes at the upper right corners of the screen,
the calculator is busy processing tasks.
8. When the processing is
complete, you will get the first
valueofX(thesmallest),with
a flashing star on the graph
at the crossing point.
 ToobtainthenextXvalue,
press
@
k
.
Note: To enlarge a part of graph after
the solution has been found,
youmayusetheZOOMBox
function.Press
Z
and use
the cursor for defining the box area.