Specifications

Reverse this procedure to reassemble and install the heat sink.
Processor
Description Spare part number
Intel Celeron B810 1.60-GHz processor (1-MB L2 cache, 800-MHz FSB,
includes replacement thermal material)
646760-001
Before removing the processor, follow these steps:
1.
Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 33), and then remove the following components:
●
Service cover (see
Solid-state module on page 34)
●
Fan (see
Fan on page 40)
●
Heat sink (see
Heat sink on page 41)
Remove the processor:
1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise (1), until you hear a click.
Component replacement procedures
43