User`s manual

30 ICOP Embedded 386SX PC/104 AIO CPU Module User's Manual
TFT_S2.dat - Data File for TFT640*480-Sync (18/24 BIT)
example : (1) HITACHI TX26D60/TX24D55
(2) TOSHIBA LTM09C015A
(3) SHARP LQ10D321
TFT_LP1.dat - Data File For TFT640*480-LP (16 BIT)
TFT_LP2.dat - Data File For TFT640*480-LP (18/24 BIT)
example : (1) Toshiba LTM09c015A)
TFT86_S1.dat - Data File for TFT800*600_sync (16 BIT)
TFT86_S2.dat Data File for TFT800*600_sync (18/24 BIT)
example : (1) NEC NL8060AC26-05
(2) NEC NL8060AC26-04
(3) NEC NL8060BC31-02
EL.dat - Data File for EL640*480
example : (1) PLANAR EL640.480-A
PLASMA.dat - Data File for PLASMA640*480
example : (1) PANASONIC S817
CRT/Flat Panel Mode
All the above BIOS support either CRT only, Flat Panel only or CRT/Flat
Panel simultaneously. To set the mode a Panel Switching Utility is used.
USAGE:
At DOS prompt type >SW508 then Screen will show
1. CRT Only
2. Panel Only
3. CRT/Panel Simutaneous
NEC NL6448AC33-18 wiring
NEC NL6448AC33-18 ICOP-6052V CON1
Pin Pin Name Pin Pin Name
CN1-1 GND 3 GND