User`s manual

6
Assembly instruction
1 2
3
1. Assemble the drum on the Main Body.
Make sure the drum all the way into the
shaft of the main body.
2. Place and push the squeezing
screw into the centre of the drum.
3. Assemble the hopper onto the Drum.
Make sure ‘open dot’ ( ) on the hopper
points to ‘dot’ ( ) on the drum.
Turn the hopper clockwise until it clicks into
the drum.
Reverse the steps carefully
when disassembling.
For proper operation,
‘close dot’ ( ) on the hopper
should be aligned with ‘dot’
( ) on the drum.
IMPORTANT
Squeezing
Screw
Drum
Drum
Drum
Hopper