Setup guide

32 | Quick Start: Installing and setting up ShareScan
Installing the Xerox Driver for ScanStation
The ScanStation uses a TWAIN driver to get input from the device. You must install and
configure the driver before licensing the device.
Before installing the driver, you must install the Sun Microsystems™ Java™ 2 Platform Standard
Edition Development Kit 5.0, update 10 or later. You can download the update from the Sun Web
site: http://java.sun.com/javase/downloads/index_jdk5.jsp. When you install the JDK, accept
the default settings.
To install the driver:
1 Insert the eCopy ShareScan CD (Disk 2) in the drive.
2 Open the Xerox_TWAIN_Driver folder.
3 Run the installation program, ShareScanOP_Driver_for_XEROX.exe, following the
instructions on the screen.
The program installs the driver in the following location:
C:\Program Files\eCopy\Xerox Driver for ScanStation
4 When the installation is complete, click Finish.
To configure the driver:
1 Select Start > Programs > eCopy Applications > Xerox Driver for ScanStation >
Xerox Driver Configuration Tool.
The Xerox Driver for ScanStation Configuration window opens.
2 On the Device tab, enter the host name or the IP Address of the Xerox device in the IP
Address field.
3 In the User Name and Password fields, enter the user name and password for the device
administrator.
4 Select the Capabilities tab and then specify the color capability of the device and whether
the device supports A3/Ledger size paper.
5 When you are finished configuring the driver, click Save.