Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 31
Installing the Toshiba TWAIN driver
The ScanStation uses a TWAIN driver to get input from the device. You must install and
configure the driver before licensing the device.
You can use Toshiba’s e-STUDIO Series Remote Scan TWAIN driver.
To install the driver:
1 Insert the eCopy ShareScan CD (Disk 2) in the drive.
2 Open the Toshiba folder and then open the TWAIN folder.
3 For information about obtaining the required Toshiba driver and firmware, refer to the
Readme.txt file.
4 Install the driver and firmware, following the instructions provided with them.