Setup guide

30 | Quick Start: Installing and setting up ShareScan
■ Address for Application: Enter the URL using the following format, where the port
number and “scanstation” are required elements:
http://<IP_Address>:8080/scanstation/
■ Timeout: Enter a timeout value for the device.
7 Click Submit.
The Standard Application Settings page now lists the application you registered.
To configure the driver:
1 Select Start > Programs > eCopy Applications > eCopy Sharp OSA TWAIN Driver
> Driver Configuration Tool.
The eCopy Sharp TWAIN Driver Tool window opens.
2 In the Device area, enter the host name or the IP Address of the Sharp device.
3 In the Web Ser ver area, enter the IP address or the host name of the ScanStation.
4 Type in the port number, if necessary, or leave the default port number (recommended).
5 At the Sharp device, select Document Filing on the control panel and then select the
newly registered application on the touch screen.
The eCopy TWAIN Driver screen appears.
6 Click Test Connection.
If the tool displays a message indicating that it found the service on the specified device,
click OK.
If the tool displays a message indicating that it did not find the service on the specified
device, click OK and then resolve the problem.
7 Click OK to save the settings.
Note: The port number specified in the window must match the port number specified in the
Address for Application field on the Standard Application Registration page.