Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 29
Installing the Sharp OSA™ TWAIN Driver
The ScanStation uses a TWAIN driver to get input from the device. You must install and
configure the driver before licensing the device.
The eCopy Sharp OSA TWAIN driver provides TWAIN support for Sharp OSA™-enabled
MFPs.
Before installing the driver, you must install the Sun Microsystems™ Java™ 2 Platform Standard
Edition Development Kit 5.0, update 10 or later. You can download the update from the Sun Web
site: http://java.sun.com/javase/downloads/index_jdk5.jsp. When you install the JDK, accept
the default settings.
To install the driver:
1 Insert the eCopy ShareScan CD (Disk 2) in the drive.
2 Open the Sharp OSA TWAIN folder and then open the folder for the driver that you want
to install.
3 Run the installation program, ShareScanOP_Driver_for_Sharp.exe, following the
instructions on the screen.
The installation program installs the driver in the following location:
C:\Program Files\eCopy\TWAIN Driver for Sharp OSA
4 When the installation is complete, click Finish.
To register the ScanStation application:
1 Open a Web browser.
2 In the Address bar, enter the name or the IP address of the Sharp device and then press
E
NTER.
The Top Pa ge appears.
3 In the navigation pane, select Application Settings and then select External Application
Settings.
The Login page appears.
4 Enter the login name and password and then click Login.
The Standard Application Settings page appears.
5 Click Add.
The Standard Application Registration page appears.
6 Enter the registration settings for the application:
■ Application Name: Enter a descriptive name, such as “eCopy Scans”.