Setup guide

28 | Quick Start: Installing and setting up ShareScan
Installing a TWAIN or ISIS driver
The ScanStation can use a TWAIN or ISIS driver to get input from the scanner. You must install
and configure the driver before licensing the device.
Drivers are typically included with scanners. However, you may need to update the driver in the
following circumstances:
■ The driver version included with the scanner may not be the most current version.
■ You are installing an ISIS scanner driver on a computer running Windows Vista.
eCopy recommends that you go to the scanner vendor’s Web site to verify that you have the latest
available driver and, if necessary, download the driver, install it on the ScanStation, and then
configure it as needed. You can check driver versions at www.scannerdrivers.com.
eCopy provides the support files that ShareScan needs to work with ISIS drivers. Before installing
the support files, you must install ShareScan (see page 34).
To install the ISIS support files:
1 Double-click the ShareScanIsis_8_0.exe application, which is located on the Scanners
installation CD.
The WinZip Self-Extractor window displays the default path, C:\.
2 Click Unzip.
The files are copied to the PIXTRAN and system32 folders in the WINDOWS folder.