Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 27
Installing a Ricoh TWAIN driver
The ScanStation uses a TWAIN driver to get input from the device. You must install and
configure the driver before licensing the device.
Version 4.0 Ricoh TWAIN drivers include a Network Connection Tool. When you have multiple
devices of the same model type, you use the tool to select the specific device on your network that
you want to use with the driver. If you are using a version 3.0 Ricoh TWAIN driver, your system
will automatically connect to the first device that it finds on your network that uses the driver.
To install the driver:
1 Insert the eCopy ShareScan CD (Disk 2) in the drive. (You can also look for drivers on
your network or download them from the Internet.)
2 Open the Ricoh folder and then open the folder for the driver that you want to install.
3 Run the installation program, following the instructions on the screen.
4 When the installation is complete, click Finish.
To configure the driver:
1 Select Start > Programs > <driver_name> > Network Connection Tool.
2 Selec the Use a specific scanner check box.
3 Click Search Scanner.
The Search Scanner: Result window lists all devices on the network that can use the
curent TWAIN driver.
4 Select the scanner that you want to use and then click OK.
The Network Connection Tool window opens.
5 Click OK.