Setup guide

26 | Quick Start: Installing and setting up ShareScan
Installing the Konica Minolta TWAIN driver
The ScanStation uses a TWAIN driver to get input from the device. You must install and
configure the driver before licensing the device.
You can use Konica Minolta’s TWAIN driver Ver. 2.
To install the driver:
1 Open a Web browser.
2 Go to www.mykonicaminolta.com.
The Login page opens.
3 Log in.
4 Download the special Konica Minolta TWAIN driver for use with your ScanStation and
your Konica Minolta bizhub device.
5 Install the driver, following the instructions provided with it.