Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 25
Associating the HP Driver for ScanStation with the MFP
You use the HP Driver for ScanStation Tool to associate the application with the HP MFP.
To associate the HP Driver with the MFP:
1 Select Start > Programs > eCopy Applications > HP Driver for ScanStation 1.2 >
HP Driver for ScanStation Tool.
The HP Driver for ScanStation Tool window opens.
2 In the Device area, enter the host name of the device or enter the IP address of the device.
3 Type in the port number, if necessary, or leave the default port number (recommended).
4 Click Test Connection.
■ If the tool displays a message indicating that the scanner is available, click OK.
■ If the tool displays a message indicating that the scanner is not connected to the
specified device, click OK, and then resolve the problem. For example, make sure that
the device is running or that you entered the correct host name or IP address.
5 Click OK to save the settings.
You are now ready to license the ScanStation (see page 36).
Note: The port number specified in the window must match the port number specified in the Port
field on the Configure page for the HP MFP (see page 24).