Setup guide

24 | Quick Start: Installing and setting up ShareScan
Configuring the HP MFP
This section applies only to devices using the Chai4 JAR files. You configure the device on the
Configure page.
To configure the device:
1 Open a Web browser.
2 In the Address bar, enter device information using the following format:
Format:
http://device_name or IP_address/hp/device/ecopy.agent
Example: http://10.10.12.241/hp/device/ecopy.agent
The eCopy HP Driver for ScanStation v2.0.0 page opens.
3 Click Configure.
4 In the Maximum Paper Size field, select the maximum paper size that your device
supports. For example, you can select A3/Ledger if your device supports page sizes up to
A3/Ledger. The default size, A4/Letter, is smaller than A3/Ledger.
5 In the Tracing field, select On if you want to enable this function. Be aware that enabling
tracing will slow down overall device performance.
6 Click Submit.