Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 23
3 To install the hp_sdc-xlD-FI_1.0.7.1.jar or the hp-ext-20-sdc.1.0.8.5.jar file:
■ If the device’s control panel is displaying a status message from the HP driver for
ScanStation application, press the Home icon to return to the main panel.
■ Scroll to the Install New Package section.
■ Next to the Enter Package File field, click Browse and navigate to the JAR files for
HP folder, which is located in the HP Driver for ScanStation 1.2 folder.
■ Open the Chai2 or the Chai4 folder (see Table 1).
■ Select the hp_sdc-xlD-FI_1.0.7.1.jar file or the hp-ext-20-sdc.1.0.8.5.jar file. Click
Open and then click Load Package Now.
The Simple Document Capture (SDC) application now appears in the Reloadable
Packages list.
4 To install the sharescanop.jar file:
■ Next to the Enter Package File field, click Browse and navigate to the JAR files for
HP folder.
■ Open the Chai2 or the Chai4 folder.
■ Select the sharescanop.jar file, click Open, and then click Load Package Now.
When the Package Loader page displays a message indicating that the JAR file has been
loaded, click Loader Home.
■ The ShareScan (for Chai2 devices) or the HP Agent (for Chai4 devices) application
now appears in the list and on the device’s control panel.
Note: You must always install this file before installing the sharescanop.jar file.
Important! The MFP will restart after the application is installed. You must wait for the device to
complete its startup cycle; this may take several minutes. When the Package Loader
page indicates that the JAR file has been successfully loaded and when the MFP has
completed its startup cycle, you can install the next JAR file.