Setup guide

334 | Reference: Installation environment
8 Verify the following settings and then press OK.
■ Primary Server (DNS): Not required in a domain-based network environment.
However, if you do not specify a DNS server, the Services Manager PC must have a
static IP address. In a workgroup environment, this field must be blank.
■ Secondary Server (DNS): Leave this field blank.
■ Host Name: Enter a unique name for the device, up to 60 characters.
■ Domain Name: Enter a domain name, if applicable.
■ Dynamic DNS Update: Should be set to On.
9 Press Done until the main screen appears.
10 Power cycle the device so that the new settings will take effect.