Setup guide

326 | Reference: Installation environment
Device worksheet
Copy and complete the worksheet below for each eCopy-enabled device that you plan to use with
ShareScan. For information about obtaining or modifying the current MEAP-enabled device
settings, see page 333.
TABLE 68. Device worksheet
Notes Device Example
Model eCopy-enabled device. iR 5020
Aficio2060
Location Physical location of the device. 1-B32
Language English
IP address (or DHCP) Domain-based networks: eCopy recommends
that you use static IP addresses.
Workgroups: You must use static IP addresses.
10.10.10.68
Gateway address Leave blank unless required by other
applications.
<blank>
Primary DNS server Domain-based networks: Not required.
However, if you do not specify a DNS server, the
Services Manager PC must have a static IP
address.
Workgroups: Leave this field blank.
10.10.10.10
Secondary DNS server Leave blank. <blank>
Host name A unique name for the device that must not
exceed 60 characters.
eCopyClient1-B32
Domain name Enter a name, if applicable. ecopy
Important! If you must uninstall the ShareScan JAR file from the MEAP device, contact Technical Support for
assistance. The Canon license allows only a single installation of the JAR file.