Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 21
2 To select the device on which you want to install the JAR files:
■ In the Navigation section, expand the HP Web Jetadmin, Device Management,
and Device Lists folders by clicking the plus sign (+) next to each.
■ Under Device Lists, select All Devices.
The Device List pane displays the available MFPs.
If the device you want to use is not listed, enter the device’s IP address in the Quick
Device Find field and then click Go. The Device Status page appears. Click All
Devices; the list now includes the new device.
■ Select the device that you want to use.
3 To upload the JAR files:
■ In the Device Tools list, select Application Manager.
The Activity Log appears.
■ In the Toolbox section, under Device Tools, click Install.
The Application Manager displays a list of applications that are currently installed on
the selected device.
■ Scroll to the Upload Device Application section at the bottom of the page.
■ Click Browse and navigate to the JAR files for HP folder, which is located in the HP
Driver for ScanStation 1.2 folder.
■ Open the Chai2 or the Chai4 folder, depending on the target device (see Table 1).
■ Select the hp_sdc-xlD-FI_1.0.7.1.jar file or the hp-ext-20-sdc.1.0.8.5.jar file, depending
on the folder you opened. Click Open and then click Upload file.
The HP Express Loader application now appears in the list.
■ Click Browse again and navigate to the JAR files for HP folder.
■ Select the sharescanop.jar file, click Open, and then click Upload file.
The HPAgent application now appears in the list.