Setup guide

20 | Quick Start: Installing and setting up ShareScan
Installing the HP Driver on the ScanStation
The driver is provided on Disk 2 of the ShareScan CD.
To install the HP Driver:
1 Insert the eCopy ShareScan CD (Disk 2) in the drive.
2 Open the HP folder and then open the folder for the driver that you want to install.
3 Run the installation program, ShareScanOP_Driver_for_HP.exe, following the
instructions on the screen.
The installation program installs the driver files in the following location:
C:\Program Files\eCopy\HP Driver for ScanStation 1.2
4
When the installation is complete, click Finish.
Installing the JAR files on the HP MFP
You can use either of the following programs to install the JAR files:
■ HP Web Jetadmin (see page 20)
■ HP’s Package Loader utility (see page 22)
If you plan to use HP Web Jetadmin, download the software from the HP Web site and install it
before installing the JAR files.
To install the JAR files (using HP Web Jetadmin):
1 To r un HP Web Jetadmin:
■ Open a Web browser.
■ In the Address bar, enter Web Jetadmin address information using the following
format .
Format:
http://servername:port/
Example: http://MFP01:8000/
■ Press ENTER.
If the Security Alert window opens, click Yes to proceed.
■ Log on to Web Jetadmin.
The Setup Wizard page opens.