Setup guide

294 | Reference: Using eCopy Connectors
Copy
Copy is available for some devices running ShareScan Embedded software. If you try to activate a
Copy profile on an unsupported device, the system will display an error message.
Before using a connector, review the quick reference section (see page 283). That section includes
information about performing functions that are common to many connectors, such as specifying
scanner and document settings.
To use Copy:
1 Place your document in the feeder or on the glass.
2 Access the Client.
3 On the main Client screen, press Copy.
4 Specify the settings (see Table 64). The available settings depend on the device.
5 When you have specified the settings, press Copy.
The device copies your document and the Copy Status window opens.
6 Press Done.
TABLE 64. Copy settings
Setting Description
Paper Tray The paper tray to use.
Color Mode The color mode. Available only on color devices.
Image Mode The image mode that best corresponds to the document that you are copying.
Brightness Move the slider or use the + and - buttons to adjust the brightness.
Number of Copies The number of copies.
Finisher Enables you to specify the finishing mode.
Two-sided Enables you to specify two-sided mode.
Image Quality
Adjustment
Enables you to remove the background color from the document and to prevent
bleed-thru.