Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 293
TABLE 63. Client: Post-scanning options
Option Description
Log Out Displays the Logon screen. Appears only when Session Logon is enabled.
New Job Displays the main Client screen. Appears only when Session Logon is enabled.
Done Displays the main Client screen. Appears only Session Logon is not enabled.
New Document Displays the scan preview screen so that you can scan a new document using the current
settings. Place the new document in the feeder or on the glass and then press Scan More
(if you are using the Client’s interface). Press Insert (if you are using the TWAIN driver’s
own interface). (If you are using a device with an embedded Client, you can press the
device’s Start button to scan the new document.
New Destination Enables you to send the scanned document to another connector. Select the target
connector in the list and then press New Destination. The Client opens the target
connector and displays the scanned document on the scan preview screen. Press Next
and then follow the prompts provided by the target connector.