Setup guide

288 | Reference: Using eCopy Connectors
10 Press Document Settings to review the settings, such as the file format (see page 166).
The settings are grouped on two tabs, Services and More. The More tab appears only if
you enable the Batching or Blank Page Removal settings.
11 Change any user-modifiable settings and then press OK.
12 When you have scanned all the pages in the document and are satisfied with the settings,
press the delivery button (Send or Next, depending on the Client).
13 If prompted, enter any additional information requested by the connector. For example, if
Session Logon is not enabled, and if the connector profile is configured to send scanned
documents from a personal e-mail account, the system will prompt you to log on.
Note: If the profile is configured to send scanned documents from a generic ShareScan User
account; you will not need to log on.