Setup guide

274 | Reference: Managing the ScanStation Client
Selecting a different TWAIN driver
You select a TWAIN driver when you license a TWAIN scanner. You may need to select a
different driver if you change the device or if you selected the wrong driver.
To select a different TWAIN driver:
1 In the console tree, select Devices > <device_name> > Manage.
2 Select the Status tab.
If you are using a Send to eCopy key, a Send to eCopy tab appears in Device properties
pane.
3 Select Enable TWAIN.
4 The Browse button next to the Driver Name field becomes active.
5 Click the Browse button ( ).
The Select Source window opens.
6 Select the driver name and then click Select.
The Client is now configured to use the new driver.
Note: The TWAIN driver that you select must be from the same manufacturer as the device.