Setup guide

270 | Reference: Managing eCopy-enabled devices
To edit a group:
1 In the console tree, right-click Devices and then click Publish connector profiles.
The Publish Connector Profiles window opens.
2 Select the group of profiles that you want to modify.
3 Click Edit.
The Modify Device Profile window opens.
4 Add or remove connector profiles.
5 Click Arrange.
The Arrange Profiles window opens.
6 Use the Move up and Move down buttons to specify the order in which you want the
connector profile buttons to appear at the device and then click Save.
The Modify Device Profile window opens.
7 Click OK.
The Publish Connector Profiles window opens.
8 Click Save.
All current profiles and publishing information are saved in the eCopyPublishingInfo
folder under the Base location folder.