Setup guide

16 | Quick Start: Installing and setting up ShareScan
Installing the JAR file on a Ricoh Embedded
device running SDK/J version 2.09 or later
The JAR file contains the ShareScan Client.
Before you can use ShareScan with Ricoh Embedded devices, you must install the JAR file
(ShareScanOp.jar) and the DALP file on the devices. They are provided on an SD card.
This procedure assumes that SDK/J version 2.09 or later is installed on the device. Note the slot
in which you installed the card.
If you are not the person who installed the SDK/J and you do not know which slot the SDK/J
SD card is installed in, you can find out by pressing the User Tools/Counter button on the control
panel. Then, on the display panel, press Extended Feature Settings > Extended Features. Note the
SD Card Slot number for the Java™ platform and then press Exit twice.
To install the JAR file:
1 Turn off the main power switch. When the power is off, the Main Power indicator on the
control panel, located above the On indicator for the Operation switch, will no longer be
illuminated.
2 Insert the eCopy SD card in the slot that does not contain the SDK/J SD card and then
turn on the main power switch.
The Main Power indicator will be illuminated.
3 Press User Tools/Counter.
4 Press Extended Feature Settings.
5 Press Extended Feature Settings again.
6 To install the application:
■ Press the Install tab and then select SD Card.
■ Select ShareScan.
■ Select Machine HDD as the installation target and then press Next.
■ When the Extended Feature Settings screen appears, press OK.
■ When the installation is complete, press Exit.
Note: See the documentation for your device for the location of the main power switch.
Note: eCopy recommends that you leave the Auto Start option selected during installation of the
JAR file.