Setup guide

266 | Reference: Managing eCopy-enabled devices
6 Select the connector profiles that you want to publish and then click OK.
The Create Profile window opens.
7 Select additional connector profiles that you want to publish. You can publish up to nine
connector profiles to any device.
8 When you have finished selecting the connector profiles to include in the group, click OK.
The Publish Connector Profiles window lists the new profile. The table specifies the
profile name and the number of connector profiles included in it.
To add target devices:
1 In the console tree, right-click Devices and then select Publish connector profiles.
The Publish Connector Profiles window opens.
2 Click Manage.
The Manage window opens.
Note: Although Copy is not supported on ScanStation devices and Fax via Print is not supported on
devices running ShareScan Embedded software, the Publish function does not keep you from
selecting these connectors. The Publish function does not know what devices will use the
group of profiles you are creating.