Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 263
Summary of the publishing process
Before publishing the profiles, the Publish function performs the following steps:
■ Makes a copy of all the required files in the Base location specified in the Publish
Connector Profiles window.
■ Creates a folder named “eCopyPublishingInfo” under the Base location folder.
■ Creates backup copies of current connector profiles on the target device, storing the copies
in the <installation_directory>\ShareScanOPManager\BackupConnectorProfiles folder on
the target device.
During publishing, the status for each device is updated. If an error message appears in the Status
column for the device, double-click the error to retrieve details about it.
If a group of profiles includes a profile for a connector that is not supported on a target device,
Publish ignores it. For example, assume that you created a group that includes profiles for the
following connectors: Copy, Exchange, Quick Connect, Scan to eCopy Desktop, and Fax via
Print. You want to publish this group to a ScanStation device and to an embedded device. The
Publish function will ignore Fax via Print when it publishes the group of profiles to the embedded
device.