Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 15
■ When the Ext. feature info screen appears, press OK.
■ When the installation is complete, press OK.
7 When the Add device to Manager screen appears, indicating that the application is
initialized, turn off the main power switch and then remove the eCopy SD card.
8 If you removed an SD card from slot 3, insert it back in slot 3 and then turn on the main
power switch.
To uninstall and reinstall the JAR file:
1 To start the SDK/J platform, press the key that was associated with the platform when it
was installed and then select the Java™ platform from the Other functions display.
2 Press Menu and then press Login. Leave the User Code field blank (you do not need to
enter a user code) and then press .
3 To stop the application, select the Stop/Start tab, select the taken Xlet, and then press
Execute.
4 To uninstall the JAR file, select the Uninstall tab, select the ShareScan OP xlet, and then
press OK.
The Uninstallation confirmation window appears. Press OK.
5 Turn off the main power switch.
6 Turn on the main power switch.
7 See the instructions for installing the JAR file (see page 14).
Note: eCopy recommends that you leave the Auto Start option selected during installation of the
JAR file.
Note: Do not turn off the main power until the panel displays the Add device to Manager screen.