Setup guide

14 | Quick Start: Installing and setting up ShareScan
Installing the JAR file on a Ricoh Embedded
device running SDK/J version 1.x
The JAR file contains the ShareScan Client.
Before you can use ShareScan with Ricoh Embedded devices, you must install the JAR file
(ShareScanOp.jar) and the DALP file on the devices. They are provided on an SD card.
This procedure assumes that SDK/J version 1.x is installed on the device. Note the slot in which
you installed the card.
If you are not the person who installed the SDK/J and you do not know which slot the SDK/J
SD card is installed in, you can find out by pressing the User Tools/Counter button on the control
panel. Then, on the display panel, press Extended Feature Settings > Extended Features. Note the
SD Card Slot number for the Java™ platform and then press Exit twice.
To install the JAR file:
1 Turn off the main power switch. When the power is off, the Main Power indicator on the
control panel, located above the On indicator for the Operation switch, will no longer be
illuminated.
2 Insert the eCopy SD card in the slot that does not contain the SDK/J SD card and then
turn on the main power switch.
The Main Power indicator will be illuminated.
3 To start the SDK/J platform, press the key that was associated with the platform when it
was installed and then select the Java™ platform from the Other functions display.
4 Press Menu.
5 Press Login. Leave the User Code field blank (you do not need to enter a user code) and
then press .
6 To install the application:
■ Press the Install tab.
■ Select the ShareScan Xlet.
■ Select Hard Disk as the destination.
Note: See the documentation for your device for the location of the main power switch.