Setup guide

228 | Reference: Connector-specific configuration information
To map index fields to fields in a database:
1 In the console tree, select Quick Connect > Properties.
2 Select the Index File tab, click New, and then define each index field that you want to map
(see page 222).
3 Under File Format, select Database and then click Map Fields.
If you have not yet configured a data source, configure it now (see page 230).
If you previously configured a data source, the Data Field Selector window opens. It
displays the connection information.
■ To use the current data source, proceed to step 4.
■ If you do not want to use the current data source, click Modify to select a different data
source. When the Select Recent Data Source window opens, click New and follow
the instructions for configuring a new data source (see page 230).
4 On the Map Database Fields tab, under Select Table Name, select a table.
5 Under Map Fields, which displays the index fields that you created, select the Quick
Connect index field that you want to map to a database field. You do not have to map all
the Quick Connect fields.
In the Database Field column, which only displays fields of STRING data type, select the
target field. The index values that the user at the device enters in the index fields will be
stored in the database fields after the document is scanned.
6 Click OK to save the settings and return to the Index File tab.
Note: The Index File tab does not indicate whether an index field is mapped to a database field.