Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 217
Defining a scanning destination
The Destinations tab enables you to define scanning destinations. You must define at least one
destination. If you define more than one destination, Quick Connect will prompt the user to
select one during the scanning process.
To define a destination:
1 Select Quick Connect > Properties.
2 Select the Destinations tab and then click New.
The New destination window opens.
3 In the Name field, type the name of the new destination.
4 Specify the type of destination (see Table 44) and then specify information for the new
destination.
5 When you have defined the new destination, click OK.
The Destinations list includes the new destination.
TABLE 44. Quick Connect Properties: Destination types
Destination
Typ e
Section Field/
Button
Description
Windows
Folder, Novell
NetWare
Folder, FTP
Folder,
WebDAV
Folder
Folder location Path to the
folder
Destination information for the scanned documents.
For Windows or Novell folders, click the Browse
button and then select an existing folder or create a
new folder and then select it. For an FTP folder, enter
the FTP location, such as “ftp://ftp01/scans”. (The
Browse button is not available for FTP folders.) For a
WebDAV folder, enter the Web location, such as
“http:/10.10.10.100/scans” or “https:/10.10.10.100/
scans”.
Enable
subfolder
navigation
Enables users to select a subfolder at the device.
Maximum
folder level
The number of folder levels down that users may
navigate.
Acquire
Scheme
Applies only to WebDAV Folder option. Enables you to
select an authentication scheme (NTLM, NTLM/
Kerberos, or Basic.) After selecting the scheme, the
authentication options specified in the scheme are
enabled.