Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 209
To configure eCopy Connector for Captaris
™
RightFax
™
properties:
1 In the console tree, select RightFax > Properties.
2 Select the Display tab and then specify the settings (see Table 14).
3 Select the Configure tab and then specify the settings (see Table 41).
4 Save the connector profile before proceeding to the Billing Codes tab.
Saving the profile enables the connector to populate the billing code fields correctly.
5 Select the Billing Codes tab and then specify the settings (see Table 42).
6 Select the Content tab and then specify the settings (see Table 15).
7 Select the Express tab and then specify the settings (see Table 16).
8 Click Save, select or specify the profile name, and then click Save.
TABLE 41. RightFax Properties: Configure tab
Section Field/Button Description
RightFax Server Server The name of your RightFax server.
User The name of the user account with which to log on to the
RightFax server and retrieve the user list. If you plan to use
Windows NT authentication, enter the user name for a
Windows NT domain account.
Password The account password.
Test Validates the connection to the RightFax server.
Send from personal
account
Sends the fax from the logged on user’s personal RightFax
account (or from a delegate account). If you do not select this
option, the connector sends faxes from the user account
specified in the User field.
Use Windows NT
authentication
Available only for RightFax Server 8.7 and later. If selected, all
users must log on to the RightFax server using their Windows
NT credentials (for setup information, see page 208.)
Use delegation Enables users with Admin access rights to send faxes on behalf
of other users. Specific delegation rights must be set up on the
RightFax server.