Setup guide

194 | Reference: Connector-specific configuration information
To configure the eCopy Connector for Fax via Lotus Notes properties:
1 In the console tree, select Fax via Lotus Notes > Properties.
2 Select the Display tab and then specify the settings (see Table 14).
3 Select the Configure tab and then specify the settings(see Table 34).
4 Select the Fax Format tab, which displays samples of the current fax address format, and
then specify the Fax format (see page 158).
If your fax server uses an embedded tag, enter the tag in the Cover Page Via Embedded
Tag field. (Some fax servers, including Captaris
™
RightFax
™
, use an embedded tag to
indicate that a cover page is required.) When a user requests a cover page, ShareScan adds
the embedded tag string to the body of the message.
5 Select the Address Books tab and then specify the settings (see Table 20 and see
Table 21).
6 Select the Content tab and then specify the settings (see Table 15).
7 Select the Express tab and then specify the settings (see Table 16).
8 Click Save, select or specify the profile name, and then click Save.
Note: This tab allows you to configure and enable the Lotus Notes Address Book and create,
configure, and enable a fax address book. All the fields are documented in the referenced
tables.