Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 189
To configure eCopy Connector for Fax via Microsoft Exchange properties:
eCopy recommends that you use the Wizard to initially configure a connector profile. Use the
Properties button on the Configure tab only if you need to make custom modifications after the
initial configuration.
1 In the console tree, select Fax via Exchange > Properties.
2 Select the Display tab and then specify the settings (see Table 14).
3 Select the Configure tab.
The Configure tab displays a summary of the settings that you specify using the Wizard or
the Properties window (see page 179).
4 Use the connector Wizard to specify the basic settings (see Table 27).
This includes specifying the Fax Format tab (see page 158).
5 If you are configuring a connector profile for an environment that uses an External
Associated Account (EAA) and contains multiple forests, and you want to add additional
forests (see page 178).
6 Select the Local Address Book tab and then specify the settings (see Table 20 and see
Table 21).
7 Select the Content tab and then specify the settings (see Table 15).
8 Select the Express tab and then specify the settings (see Table 16).
9 Click Save, select or specify the profile name, and then click Save.
To configure eCopy Connector for Fax via Microsoft Exchange services:
1 In the console tree, select Fax via Exchange > Services.
The Services pane appears.
2 Configure the connector services (see page 165).
3 Click Save, select the profile name, and then click Save.