Setup guide

178 | Reference: Connector-specific configuration information
To configure eCopy Connector for Microsoft Exchange services:
1 In the console tree, select Exchange > Services.
The Services pane appears.
2 Configure the connector services (see page 165).
3 Click Save, select the profile name, and then click Save.
To add additional account forests:
This procedure applies only to environments that use an External Associated Account (EAA) and
contain multiple forests.
1 After using the Wizard to configure your environment settings, select Properties on the
Configure tab and then select the Advanced Settings tab.
2 Make sure that the current protocol matches the protocol for your environment.
If you change the protocol, the system will prompt you to re-enter the user credentials on
the Basic Settings tab (Table 28).
3 Select Use External Associated Account.
The Resource Forest Settings window opens.
4 Enter the Global Catalog Server information (see Table 32) and then click OK.
In the Exchange Properties pane, the Additional Account Forests section becomes
active.
5 Click New.
The Account Forest Settings window opens.
6 Enter the Account Forest and Service Account information for the new account forest.
7 Click Test.
8 When the test is successful, click OK.
The new account forest is added to the list.
9 Click OK to return to the Configure tab.