Setup guide

164 | Reference: Common configuration information for connectors
Configuring connector profiles to use address books
After creating and enabling address books, you can configure connector profiles to use them.
To configure connector profiles to use address books:
1 In the console tree, select your e-mail or fax connector, select Properties, and then click
the Local Address Book or Address Books tab.
2 Under Local Address Book or Address Book (for Lotus Notes connectors), click
Choose.
The Data Link Properties window opens.
3 Select the Provider tab and then select Microsoft OLE DB Provider for SQL Server.
4 Select the Connection tab and then specify your connection settings (see Table 22).
5 Click OK to close the window.
6 To verify that you can manually add an entry to the address book, click Add, enter user
information in the Add a Contact window, and then click Add.
7 If the address book is not enabled, select Enable.
8 Click Save, select or specify the profile name, and then click Save.
TABLE 22. Data Link Properties window: Connection tab
Step Option Description
Select or enter a
server name.
The name of your server.
Enter information to
log on to the server.
Use a specific user name
and password
User name: sa
Password: The password specified when you installed
SQL Express.
Allow saving password Required for correct configuration of the address book.
Select the database
on the server.
The address book that you want the connector to use.
Test Connection Tests the connection.