Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 131
3 Click OK.
When you add a product key for a ScanStation, the Select Source window opens. Select
the appropriate TWAIN driver and then click Select. The system adds the ScanStation to
the list of devices and then displays the Product Key Information window. You can
immediately activate the key via the Internet (recommended), or activate it later (see
page 133).
When you add a product key for a device running ShareScan Embedded software, the
License Information tab displays product key information. You must now add the device
(see page 132).
To import product keys:
1 Create a text (.txt) file containing all your product keys, or, if you received a CD with
product keys, access the text file on the CD. If you received your product keys by e-mail,
you can copy and paste them into Notepad and save the file with a .txt extension.
Make sure you enter the product keys accurately. The Load Keys function does not report
invalid keys.
2 In the console tree, select System Information > Licensing.
3 Click Load Keys.
The Open window opens.
4 Select the text file containing the product keys and then click Open.
The License Information tab displays the imported keys.
Deleting product keys
You should only delete a key if you are upgrading the license type, for example, if you are
upgrading the key from “Evaluation” to “Full Product”. If you delete a key that has been
activated, you may lose the use of that key.
Note: If you assign a device to another Services Manager, the license moves with the device; therefore, you
do not need to delete the key manually.