Setup guide

122 | Reference: Configuring the system
To grant access to other Services Managers:
1 In the console tree, select the name of the Services Manager and then click the Display
Security Options button on the console toolbar.
The Security Options window opens.
2 Select the Enable option. By default, this option is disabled.
3 Select the Allow addition of devices and connector profile publishing option.
4 In the address field, enter the IP addresses of the Services Managers to which you want to
grant access and then click Add.
The addresses appear in the Manager IP addresses list.
5 Repeat step 4 until you have added the addresses of all the Services Managers to which you
want to grant access. Those Service Managers will have the right to add or acquire devices
managed by this Services Manager or to publish connector profiles to it.
6 Click OK.
To remove access rights from a Services Manager:
1 In the console tree, select the name of the Services Manager and then click the Display
Security Options button on the console toolbar.
The Security Options window opens.
2 In the Manager IP addresses list, select the addresses and then click Remove.
3 Click OK.
The system prompts you to confirm that you want to remove the selected IP addresses.
4 Click OK.
Note: Even if addresses appear in the list of allowed Managers, access by those Services Managers
will be blocked if you select the Prevent addition of devices and connector publishing option.